In the construction industry, every small difference may lead to the failure of the entire project. The construction template is also an important part. The correct selection of the construction template is as follows:
1. The construction of beam-column houses should adopt medium-sized composite building templates. Because of the large changes in the cross-section of beams and columns, it is not suitable to cut with multi-layer boards.
2. The wall formwork can be used as a medium-sized combined building formwork. As the general requirements of the same type of high-rise building group are uniform, the medium-sized combined building formwork helps to ensure a higher turnover rate.
3. The core tube of super high-rise or high-rise buildings should adopt “hydraulic climbing formwork”. The climbing formwork process combines the advantages of large formwork and sliding formwork. It can rise layer by layer with the construction of the structure, and the construction speed is faster, saving space and Tower crane hoisting times, safe high-altitude operations, no external scaffolding, construction, especially suitable for construction operations of steel structure concrete inner cylinder.
4. It is recommended to use the whole multi-layer board as the floor building template, and try to use the phenolic-clad 15-18mm thick multi-layer building template. The edge of this kind of building template is damaged after repeated use, so it must be cut in time to ensure that the edge of the multilayer board is flat.
